Security Window Film Installation for Toronto Homes and Businesses
Here is how a burglar decides 👇
They are not picking your house because of how it looks. They are picking the window that gives them the least resistance in the least amount of time.
- Your alarm goes off after they are already inside.
- Your camera records what already happened.
- A lock stops nothing once the glass breaks.
For the last 8+ years, Supply Maker has been hearing of Toronto homeowners stack cameras, alarms, and motion sensors on their properties, and still can’t sleep peacefully at night.
None of those tools address the glass itself. A broken window is open in under 10 seconds and the alarm has barely registered.
Our film bonds to your existing glass and turns it from a 10-second opening into a barrier that holds under repeated impacts.
When a window won’t give, they move on to an easier target.
Supply Maker Security Window Films
A clear, high-strength film applied directly to your existing glass.
On impact, it holds the shattered pieces together so the glass bends and grips instead of opening up.
A window that holds costs the burglar time they are not willing to spend.
Works on single and double-pane windows.
No change to the look of your glass.
Supply Maker Security Film for Glass Doors
Glass doors are a preferred entry point because of their large surface, fast access, often out of direct street view.
Our film for glass doors reinforces the full panel.
The glass does not give on impact the way an unprotected door would.
Your entrance stays open and welcoming. It just no longer gives way on impact.
Supply Maker Safety Window Films
Designed to hold glass fragments together on impact from a break-in attempt, a storm, or an accident.
If your glass breaks, the pieces stay where they are and not scattered across the floor where your kids are walking.
A quiet layer of protection that works without changing how your home looks.
Supply Maker Safety & Security Window Films
For homeowners who want impact resistance and glass retention in one film.
Rated to hold through repeated forced impact.
Your windows stay clear and your view stays open.
The only thing that changes is the time and effort it takes to get through.
Supply Maker Privacy Security Window Films
Keeps people from seeing inside your home without making your rooms feel closed in or dark.
Combined with our security film technology, you get privacy and impact resistance from a single installation.
From outside, your windows look like every other window on the block.
Why Supply Maker Security Window Films?
- Makes forced entry take long enough that most burglars give up and move on
- Holds shattered glass in place with no sharp pieces on the floor where your family walks
- 8+ years of installation experience across Toronto and the GTA
- Blocks up to 99% of UV rays for protecting your furniture, floors, and family from daily sun damage
- Your windows look identical after installation with no bars, no mesh, no tint
How it works?
Step 1 — We assess.
We walk your property and identify the highest-risk entry points, ground-level windows, glass doors, side and back panels that are out of direct street view.
Step 2 — We install.
The film bonds directly to your existing glass using a water-based process. No drilling, no new hardware, no damage to your frames.
A typical home is done in under a day.
Step 3 — You’re covered.
The film cures fully within 30-90 days (temperature depending) and carries a manufacturer’s warranty. Your windows look the same.
The difference only shows up when someone tries to get through.
Security Film FAQ
What is security window film?
A clear, high-strength layer that bonds to your existing glass and holds it together under impact. It does not stop the glass from cracking and it stops the pieces from opening up. A window with this film bends and grips instead of shattering into an open hole. That delay is what makes the difference. A burglar who cannot get through in 60 seconds is a burglar who moves on.
Do security films actually stop break-ins?
No single product stops every break-in. What the film does is increase the time and force required to get through your glass. Research on burglar behavior consistently shows most abandon a target when entry takes longer than expected. Supply Maker makes your ground-level windows the entry point that costs them the most time and the one they are most likely to skip.
Will it change the appearance of my windows?
No. The film is optically clear. From inside and outside, your windows look identical to how they look today. No bars. No mesh. No visible change, unless you choose a privacy film.
Do you offer installation in Toronto & the GTA?
Yes. We serve Toronto, North York, Etobicoke, Scarborough, Mississauga, Brampton, Markham, Vaughan, Richmond Hill, Aurora, Newmarket, King City, Pickering, Ajax, Whitby, Oshawa and more!
What our clients say
